OSHA Exposure Control Plan Template for Med Spas (2026)
The written bloodborne pathogens document your practice keeps on file — annotated section by section, with role-by-role exposure determination, the hepatitis B offer and declination record, a post-exposure workflow, a sharps injury log, and the annual review signature block.
Quick Answer
Yes — almost every med spa needs one. If any employee can reasonably be expected to contact blood or other potentially infectious materials on the job, OSHA's Bloodborne Pathogens Standard (29 CFR 1910.1030) requires a written exposure control plan. The plan names which job roles are exposed, the controls and PPE that protect them, the hepatitis B vaccination offer, the post-exposure follow-up process, training and recordkeeping, and a sharps injury log. It is reviewed at least annually, with documented staff input and safer-device consideration, and signed by the people accountable for it.
Most med spas have an infection control policy; far fewer have the separate document an OSHA inspector asks for by name: the exposure control plan. The two are related but not interchangeable. The infection control policy describes how your team keeps patients and rooms safe day to day; the exposure control plan is an employer document about employees — who on your payroll can be exposed to blood, what protects them, and what happens, step by step and on paper, when a needle goes into the wrong hand.
This page is a fill-in template for that document. It walks the plan section by section, tells you what to write in each, flags where med spa operations create exposure that a generic dental or clinic template misses, and ends with a sharps injury log you can set up today.
Looking for the day-to-day practice rather than the document? Hand hygiene, aseptic injection technique, device reprocessing, room turnover, multi-dose vials, and outbreak response are covered in our med spa infection control standards guide. This template references that program; it does not replace it.
In short
An OSHA exposure control plan is the written document a med spa keeps under the Bloodborne Pathogens Standard, 29 CFR 1910.1030. It lists exposed job roles and tasks, engineering and work-practice controls, PPE, housekeeping, regulated waste and laundry handling, the hepatitis B vaccination offer with declination records, post-exposure evaluation and follow-up, training, and recordkeeping including a sharps injury log. It is reviewed at least annually and signed off by the practice's safety lead and medical director. This page is a template, not legal advice.
Does Your Med Spa Need an Exposure Control Plan?
Verdict: if you employ anyone who injects, draws blood, performs microneedling, handles used sharps, or cleans up after any of those tasks, yes. The Bloodborne Pathogens Standard applies to employers whose employees have occupational exposure — a reasonably anticipated contact with blood or other potentially infectious materials as a result of doing the job. It is not limited to hospitals, and nothing in the way a med spa is branded or licensed takes it outside the standard. A practice that injects neuromodulators five days a week has occupational exposure on day one.
The test turns on the task, not on how careful your staff are — which is why the plan's exposure determination is written by job classification and task, not by individual track record.
Who is covered — and the edge cases
The standard protects employees. A solo physician-owner with no staff sits in a different position from a practice with a payroll, and independent contractors raise their own questions about who the responsible employer is. Those are fact-specific calls to make with counsel. The safe operating posture for nearly every med spa is the simple one: if anyone working in the building could be exposed, write the plan and include them.
Why it has to be its own written document
The standard calls for a written exposure control plan. A paragraph inside a general policy manual, or a slide in an onboarding deck, does not read as that plan when someone asks for it by name. Keep it as a standalone document with its own title, version number, review history, and signature block, and cross-reference it from your policy manual and SOP library.
Federal standard, state plans
29 CFR 1910.1030 is the federal baseline. Some states run their own OSHA-approved State Plans, which can impose requirements at least as strict as the federal standard, and sometimes stricter. Build your plan to the federal standard first, then confirm with your state's occupational safety program whether anything is added on top. Our med spa regulations by state reference is the starting point for the state-level picture.
How to Use This Template
The annotated sections below follow the logical order most bloodborne pathogens plans use. Read every annotation against the current text of 29 CFR 1910.1030 before you finalize — the standard is the authority, and this page summarizes it in plain language rather than reproducing it.
- Write in your practice's own facts. Name actual rooms, actual devices, actual job titles.
- Assign owners by role, not by person. "Practice Manager" survives turnover; a first name does not.
- Keep the appendices live. Store the exposure table, sharps log, hepatitis B records, and training roster as appendices you can update without re-signing the plan.
- Have the right people sign. The practice's designated safety officer or compliance lead and the medical director adapt and sign it. A template you downloaded and filed unread protects nobody.
The Annotated Exposure Control Plan Template, Section by Section
Section 1 — Plan Header, Purpose, and Responsibility
Open the plan with a header block that answers, at a glance, whose plan this is and whether it is current.
Template — Header Block
- Practice legal name and location(s) covered: one plan per site, or one plan with a site-specific appendix for each location
- Plan version and effective date
- Date of last annual review and date the next review is due
- Plan administrator (role): keeps the plan current, schedules training, maintains the logs
- Clinical lead (role): usually the medical director, accountable for clinical judgment in the plan and for post-exposure referral arrangements
- Where employees can read the plan: physical location and electronic location
- Purpose statement: to eliminate or minimize occupational exposure to blood and other potentially infectious materials, in accordance with 29 CFR 1910.1030
Annotation: Naming two owners — an administrator for the paperwork, a clinician for the substance — prevents the most common failure: a plan written once and never touched again because nobody's role was on it.
Section 2 — Exposure Determination by Job Role
This is the heart of the plan and the section most often left vague. The standard asks the employer to identify job classifications in which employees have occupational exposure, and the tasks and procedures where exposure occurs. Base each determination on the task itself — the question is whether the task carries exposure, not whether gloves happen to reduce it. The standard addresses how PPE relates to this determination, so confirm its wording when you write this section.
Split your roles into two lists: classifications in which all employees have occupational exposure, and classifications in which some employees do, with the specific tasks named. A med spa version usually looks like this:
| Job role | Typical exposure category | Tasks to list in the plan |
|---|---|---|
| Injector (physician, NP, PA) | All employees in role | Neuromodulator and filler injection; cannula placement; hyaluronidase injection; any vascular-occlusion response; handling used needles and cannulas; disposal into sharps containers |
| Registered nurse | All employees in role | Delegated injections; venipuncture for PRP or labs; IV starts where offered; assisting at procedures; handling and disposing of sharps; cleaning blood-contaminated equipment |
| Esthetician | Some employees, depending on services | Microneedling and other skin-penetrating device work where within the role's scope in your state; extractions; dermaplaning; cleaning and changing device tips; room turnover after bleeding procedures |
| Front desk / patient coordinator | Some employees, if assigned | Only if assigned: handling specimen bags, restocking rooms, responding to a spill, assisting during a medical emergency. If none of these is ever assigned, record that and state that the role has no occupational exposure |
| Cleaning / environmental staff | All employees in role (if employed by you) | Terminal cleaning of treatment rooms; emptying waste; handling closed sharps containers; cleaning surfaces after visible blood; handling contaminated laundry |
Annotation: The front-desk row is where practices get caught both ways. Some list front desk as exposed "to be safe" and then never train them, which is worse than listing them accurately. Others omit them while routinely asking them to turn over rooms on busy days. Write down what each role is actually assigned, and when that changes, update the table. If your cleaning crew is a contracted service, record that in this section and note how you coordinate with their employer on hazards in your building.
Add medical assistants, device operators, and the medical director as rows if they are on your roster: every person on payroll appears somewhere, exposed or recorded as not.
Section 3 — Methods of Compliance
This section explains how the practice controls the exposure Section 2 identified.
3.1 Standard precautions statement. State that all blood and other potentially infectious materials are treated as infectious, for every patient. One sentence is enough here; the clinical detail lives in your infection control program.
3.2 Engineering controls. List the physical controls in use, room by room. For a med spa this typically means:
- Puncture-resistant, labeled sharps containers mounted or placed within arm's reach of every point of use — injection chairs, phlebotomy station, microneedling room
- Safety-engineered sharps where commercially available and appropriate: retractable or shielded needles, safety blood-collection sets for PRP draws
- Closed tube systems and centrifuge lids for PRP processing
- Handwashing facilities and, where sinks are not immediately reachable, an approved alternative such as antiseptic hand rub
Then describe how engineering controls are examined and maintained — who checks sharps container fill levels, how often, and how the check is logged. A control nobody inspects degrades into a full container wedged shut.
3.3 Work-practice controls. These are the behaviors that reduce exposure. Write them as rules, not aspirations. The standard itself lists specific work-practice requirements, so check your list against its current text; a med spa version typically includes rules like these:
- No recapping, bending, or breaking of contaminated needles by hand; if recapping is ever unavoidable for a specific clinical task, describe the one-handed or mechanical method permitted and the task it applies to
- Used sharps go directly into the container — never set on a tray, bed, or counter first
- Hand hygiene after glove removal and after any contact with blood
- No eating, drinking, applying cosmetics, or handling contact lenses in areas where exposure is reasonably likely
- No food or drink stored in refrigerators, freezers, or cabinets where blood products or injectables are kept
- Procedures performed so as to minimize splashing and spraying, particularly during PRP preparation and microneedling
3.4 Sharps disposal. Name the container type, where each one sits, the fill-line rule, who closes and removes full containers, and where closed containers are stored until pickup. Containers are closed before they reach the marked fill line and never reopened. Cross-reference the regulated waste section for what happens next.
3.5 Personal protective equipment. Build a task-by-PPE matrix rather than a generic statement. For each task in Section 2, state what is required: gloves for every procedure involving potential blood contact; face and eye protection where splash or spray is possible, such as PRP processing or microneedling; protective gowns or lab coats where clothing could be soaked. Then state that the practice provides PPE in appropriate sizes in each room and handles its cleaning or disposal — staff do not take it home. Note alternatives for employees with glove allergies.
3.6 Housekeeping. Write a cleaning schedule for contaminated surfaces and equipment, the disinfectant used, and the method — including how broken glassware or a dropped sharp is picked up with a mechanical tool, never by hand. Keep it brief and point to your room-turnover SOP for detail.
3.7 Regulated waste. Define what your practice treats as regulated waste (sharps, items saturated or caked with blood, and so on), how it is contained and labeled, and who your contracted hauler is. Medical waste transport and disposal are governed largely by state rules rather than by OSHA, so this section names your state's program and your vendor, and stops there. Keep pickup receipts or manifests on file alongside the plan.
3.8 Laundry. If anything reusable gets contaminated — towels, gowns, linens, headbands — describe how it is handled with minimal agitation, bagged at the point of use, labeled or color-coded so the launderer knows what it is, and laundered by the practice or a commercial service. If you use disposables instead, say so in the plan.
Section 4 — Hepatitis B Vaccination Offer and Declination Record
The plan must describe how the hepatitis B vaccination series is made available to employees with occupational exposure. The standard sets conditions on that offer — including its timing relative to an employee's assignment, its cost to the employee, and who administers it — so confirm the current conditions against 29 CFR 1910.1030 rather than relying on a summary.
Template — Hepatitis B Record (one per exposed employee)
- Employee name and job classification (matching a Section 2 role)
- Date of initial assignment to an exposed role
- Date bloodborne pathogens training was completed
- Date the vaccination was offered and by whom
- Outcome: accepted (dates of each dose, provider) / previously vaccinated (documentation on file) / declined (signed declination attached)
- Declination form: the declination statement in the wording the standard specifies, signed and dated by the employee
- Later change of mind: record the date of any later request by an employee who first declined, and check the standard for how such a request must be handled
Annotation: The declination is a specific form, not a casual "I'll pass" in an email. Use the statement wording the standard specifies — do not paraphrase it — and keep it signed and dated. Missing declinations are a classic finding: the practice offered the vaccine verbally, the employee declined verbally, and nothing exists on paper to prove either happened. Store these records with the employee's confidential medical file, not in their personnel folder.
Section 5 — Post-Exposure Evaluation and Follow-Up Workflow
This section tells an employee exactly what happens in the minutes, hours, and days after a needlestick, cut, or splash to the eyes, mouth, or broken skin. Write it as a numbered workflow and post a one-page version in every treatment room.
- Immediate first aid. Wash needlesticks and cuts with soap and water; flush splashes to the nose, mouth, or skin with water; irrigate eyes with clean water or saline. Do not squeeze the wound or apply caustic agents.
- Report immediately. The employee tells the designated person on shift — name the role — before finishing the procedure if another clinician can safely take over.
- Refer for medical evaluation promptly. Name the occupational health provider, urgent care, or emergency department the practice uses, with its address and phone number written into the plan, and an after-hours alternative. Post-exposure care is time-sensitive; arrange the referral relationship before you need it.
- Document the route and circumstances. Who, when, where, what device, what task, what happened — enough to complete the incident report and the sharps injury log.
- Identify the source individual where possible, and follow the standard and your state's consent and testing laws for any source testing. The process for requesting consent and handling results is set by law, so route it through the clinical lead rather than the front desk.
- Send the evaluating provider the information the standard lists — confirm the current list against 29 CFR 1910.1030 and keep a pre-assembled packet (job description, blank exposure report, vaccination status) ready so nothing is hunted for on the day.
- Obtain and file the provider's written opinion and give the employee a copy within the time the standard sets. Confirm the content limits and timing against the current standard.
- Record the injury. Enter sharps injuries on the sharps injury log; assess whether the incident is recordable under OSHA's injury and illness recordkeeping rule.
- Review the cause. Within the plan's review process, ask what failed — device, practice, staffing, layout — and whether a safer device or changed procedure should follow.
Annotation: Practices most often skip the last step. Keep everything about the employee's medical evaluation confidential and separate from personnel files.
Section 6 — Hazard Communication and Training Records
Hazard communication. Biohazard labels — or color-coded containers where the standard permits them — identify regulated waste, sharps containers, refrigerators holding blood products, and contaminated equipment being sent out for service. List where labels are used in your building. Your chemical hazard communication program (safety data sheets for disinfectants and peel solutions) is a separate OSHA obligation; reference it here.
Training. Bloodborne pathogens training is delivered at hire — before the employee takes on exposed tasks — and at least annually thereafter. The standard also sets out what the training must cover and how it is delivered, including when additional training is needed after a change in tasks; build your curriculum against the current text rather than a summary, and use this plan as part of the content, so every trainee knows where it is and what it says.
Template — Training Record (one per session)
- Date of the session
- Summary of contents (or attach the agenda and materials)
- Trainer's name and qualifications
- Names and job titles of every attendee
- Session type: initial / annual / change in tasks or procedures
Annotation: A sign-in sheet with names alone does not meet this. Training records are kept for three years from the date of training. For the onboarding and annual calendar this training sits inside, see our guide to med spa staff training requirements.
Section 7 — Recordkeeping
Close the plan with a records map: what each record is, where it lives, and how long it is kept.
| Record | Contents | Retention |
|---|---|---|
| Employee exposure medical record | Hepatitis B vaccination status and dates, exposure evaluation and follow-up records, provider's written opinion — kept confidential | Duration of employment plus 30 years |
| Training records | Date, content summary, trainer and qualifications, attendee names and job titles | Three years from the date of training |
| Sharps injury log | One entry per sharps injury, recorded so the injured employee's confidentiality is protected | On the schedule set by OSHA's injury and illness recordkeeping rule — confirm the current period |
| Plan review history | Each annual review, what changed, safer devices considered, staff input solicited | Keep every superseded version; set your own retention period with counsel |
Annotation: Before you set access permissions, read the recordkeeping provisions of 29 CFR 1910.1030 for any rules on who may see these records and what happens to them if the practice closes or changes hands, and make sure a sale of the practice includes a plan for these files.
Sharps Injury Log Template
A sharps injury log is a running record of every percutaneous injury from a contaminated sharp — a needlestick, a cannula puncture, a cut from a blade. It exists so the employer can see patterns across injuries and choose safer devices, which is why it records the device involved, not just the person. The standard requires the log to be kept in a way that protects the injured employee's confidentiality. Confirm how the requirement applies to your practice against the current standard — and keep the log regardless; it is the cheapest safety data you will ever collect.
Set the log up with these fields. Confirm that it captures at least the content the current standard specifies:
| Field | What to enter |
|---|---|
| Entry number | Sequential reference; links to the confidential incident file |
| Date of injury | Date (and time, if useful for staffing analysis) |
| Type of device | For example: hypodermic needle, blunt-tip cannula, blood-collection needle, microneedling cartridge, scalpel blade |
| Brand / model of device | Manufacturer and product, including whether it had a safety feature and whether that feature was activated |
| Work area where it occurred | Treatment room, phlebotomy station, PRP processing area, sterilization area, front of house |
| Task being performed | Injection, venipuncture, cartridge change, disposal, cleanup |
| How the incident occurred | Brief factual explanation — before, during, or after use; during disposal |
| Body part injured | For example: left index finger |
| Job classification | Role, not name — this is how the log protects confidentiality |
| Follow-up action / device review | Whether the incident prompted a device or procedure change, cross-referenced to the annual review |
The log is not the incident report
Keep three things separate: the sharps injury log (device-focused, de-identified, used for pattern analysis), the incident report (internal narrative of what happened), and the employee's confidential exposure medical record (evaluation, testing, written opinion). An employee's name and test results never appear on the log.
Annual Review: What It Must Show and Who Signs It
The plan is reviewed and updated at least annually, and whenever new or modified tasks and procedures, or new or revised positions, affect occupational exposure. Two parts of that review are the ones practices most often leave undocumented:
- Safer medical devices. The review documents that the practice considered and implemented appropriate, commercially available, effective safer medical devices. Write down what you evaluated — a safety blood-collection set, a different cannula, retractable syringes — and what you decided and why.
- Frontline input. The employer solicits input from non-managerial employees responsible for direct patient care in identifying, evaluating, and selecting engineering and work-practice controls, and documents it in the plan. A review that records no staff input is incomplete on its face, no matter how thorough the rest is.
Template — Annual Review & Sign-Off Block
- Review date and the trigger (scheduled annual / new service / new device / new position / exposure incident)
- Changes since last review: services added or dropped, rooms reconfigured, roles added
- Exposure determination re-checked: yes / changes made
- Sharps injury log reviewed: number of entries and any pattern noted
- Safer devices considered: devices evaluated, decision, reason
- Non-managerial staff input: names and roles of direct-care employees consulted, method (meeting, survey, device trial), and their feedback
- Training curriculum updated: yes / no
- Signature — plan administrator / safety officer, with date
- Signature — medical director, with date
Who signs: the practice's designated safety officer or compliance lead, who owns the document, and the medical director, who owns the clinical judgment in it. An owner who is neither may co-sign for accountability, but should not be the only signature. If your medical director changes mid-year, have the new one sign the current plan right away.
Operations & Compliance Kit
Your plan says training happens. Your SOPs have to prove it.
The exposure control plan is yours to adapt from this template. The Operations & Compliance Kit supplies the protocols around it — a staff training protocol with onboarding checklists (including infection control and OSHA bloodborne pathogen training), an ongoing training schedule and completion records, plus medical director supervision, supply and inventory, intake, and aftercare SOPs.
Med-Spa-Specific Exposure Points Your Plan Should Name
Generic templates written for hospitals and dental offices rarely name the devices that create exposure in an aesthetic practice. Add a short subsection to Section 2 or Section 3 for each of the following that applies to your menu.
Needles and cannulas
Injectables generate the highest volume of sharps in most med spas, and much of the risk sits outside the injection itself: drawing up and reconstituting product, swapping needles between draw-up and injection, and clearing a tray at the end of a busy column. Cannulas still need a sharp introducer needle, which is easy to forget on the tray. Your plan should name each sharp in use and where each is disposed of, and the safer-device review should look specifically at these products.
Microneedling
Microneedling creates pinpoint bleeding across a treatment area, and the cartridge is a multi-needle sharp. Exposure points include changing or removing cartridges, wiping blood and serum from the treated skin, splatter onto the face shield or device housing, and cleaning the handpiece afterwards. Name cartridge disposal as a sharps task, specify eye and face protection for the operator, and list the handpiece cleaning step in housekeeping. If estheticians perform microneedling in your state, they belong in the exposed classification for that task.
PRP draws and processing
Platelet-rich plasma adds two exposure steps a pure-injectables practice does not have: venipuncture and processing blood outside the body. Name the blood-collection device, the centrifuge, tube handling, and the transfer of plasma into syringes. If the person drawing blood is not the person injecting it, both roles need to appear in Section 2.
Laser plume
Laser-generated plume is not the core subject of a bloodborne pathogens plan, and our infection control guide notes that OSHA can address adjacent hazards like plume from procedures that create tissue debris through its General Duty Clause. The practical approach: list laser procedures that create plume as an adjacent hazard in your plan, and point to your laser safety program — smoke evacuation, eyewear, and controlled-area rules — for the controls, rather than re-writing them here.
Get the Free Med Spa Compliance Checklist
The full practice-readiness audit — the yes/no checkpoints behind this guide, delivered to your inbox so you can find your gaps before a board does.
It usually lands in your Promotions tab (or spam) — move it to your inbox and add MedSpa Standards to your contacts.
No spam. Unsubscribe anytime.
Common Inspection Failures in Exposure Control Plans
OSHA inspections of med spas are typically complaint-driven, frequently by a current or former employee, which means the plan is often examined after something has already gone wrong. Our med spa inspection guide lists missing exposure control plans, undocumented bloodborne pathogen training, and inadequate sharps containers among the common OSHA findings at med spas. The failures cluster into patterns:
- No plan at all, or a plan that exists only as a section of a larger manual and cannot be produced as its own document.
- A generic plan never adapted. Dental or hospital job titles, devices the practice does not use, no mention of microneedling or PRP.
- Exposure determination that does not match reality. Front desk or cleaning staff doing room turnover but missing from the list.
- No annual review on paper, or a review that records no safer-device consideration and no frontline staff input.
- Hepatitis B gaps. No record of the offer, verbal declinations, or a declination not using the required statement.
- Training records that are only sign-in sheets, missing content summaries or trainer qualifications.
- No arranged post-exposure provider. The plan says "seek medical attention" with no named provider, phone number, or after-hours option.
- No sharps injury log, or a log that names employees instead of protecting their confidentiality.
- Sharps containers past the fill line or not at the point of use — a physical finding that contradicts the written plan on the spot.
- A plan signed by a former medical director, or not signed at all.
Every item on that list is fixable in an afternoon with a template and a decision-maker in the room.
Exposure Control Plan Checklist
Run this before you sign the plan and again at each annual review.
Where this plan sits in your document set
Your policies and procedures manual should reference it by name; your SOP library holds the clinical steps it relies on; and our complete list of med spa forms shows where it fits.
This template is general information for med spa operators, not legal advice. It summarizes the OSHA Bloodborne Pathogens Standard in plain language and does not reproduce it. Your practice's safety officer and medical director should adapt this template to your actual roles, services, and devices, confirm every element against the current text of 29 CFR 1910.1030 and any applicable state plan, and sign it. Consult occupational health and legal counsel for your specific situation.
Frequently Asked Questions
Does a med spa need an exposure control plan? + −
What should be in an exposure control plan? + −
What is a sharps injury log? + −
Who signs a med spa exposure control plan? + −
How often does an exposure control plan need to be reviewed? + −
Is an exposure control plan the same as an infection control policy? + −
Do front desk staff need to be in the exposure control plan? + −
Every Protocol, Ready to Adapt
Building your compliance binder from scratch? Start with the full set.
All 62 SOPs across injectables, laser, weight loss, hormones, operations, and emergencies — ready for your medical director to adapt and sign.
View Complete Suite — $997